Walk-In Van Drawer Units & Cabinets

Drawer Modules



Drawer Units - Lock 'n Latch System


#9 - 4 Drawer Shallow Unit

#919 - 3 Drawer Combo Unit

#19 - 2 Drawer Medium Unit

DC6   Base 3 Drawer narrow model



Organize small parts with our flexible and rugged composite Drawer Components.

Drawer Retention stops prevent drawers from opening while the vehicle is in transit.

The interlocking feature allows you to add multiple units vertically or horizontally.

Made of hi-impact polymer for a quiet operation.

Each drawer comes with 2 dividers and 7 divider slots.





DC12   Base 3 Drawer wide model


#2 - 4 Drawer Medium Unit

#8 - 3 Drawer Medium Unit


Drawers are welded and have reinforced drawer slides for strength.


Can be locked with a padlock (not included) for security.


Divide drawers with optional metal "egg crate" dividers.


Optional Foam Liner Kits cover sides and bottom of drawers for extra protection.

Tote Trays and Cases

SPT-4  Combo Totes and Rack - (2) Steel Trays & (2) Poly Cases

SPT-4P  Poly Totes and Rack - (4) Poly Cases

SPT-4S  Steel Totes and Rack - (4) Steel Trays

SPT-S  Additional Steel Tray

SPT-P  Additional Poly Tote

Take small parts and tools right to the job site with removable tote trays and cases.


Steel tote trays feature fold-down carry handles and four large storage compartments with adjustable dividers.


Poly tote cases offer a see-through lid with latches to prevent spilling, four compartments and twelve adjustable dividers.


Trays and cases store in a 19 3/4"W x 20 1/8"H x 13 3/8"L modular rack that can be stacked or floor mounted.

Cabinet Modules

Shelf Cabinets


**Shelf Cabinets are available in 12" & 18" front to rear lengths.

  **Can be used free standing or stacked with lockable drawer units.

  **Locking recessed tee-handles for secure storage & a durable gray powder coat finish.

  **Feature an open side and can be combined for side-by-side use holding items up to 35" long.

  **Optional end panel can be added to close off side when required.

  **Include an adjustable shelf that can be removed.

  **Optional foam liner kits can be added for extra protection and vibration reduction.

  **Provide a solid surface to stack modular drawers, cabinet and bins.



  **Wheel well cover cabinets are designed with an open back and bottom.

  **Serve as an enclosure for rear wheel wells.

  **Provide a solid surface to stack modular drawers, cabinets and bins.

  **Cabinets come with locking recessed tee-handles for secure storage.

  **Finished with a druable gray powder coat finish.





  **Full-door Lockers feature a 46" high storage space with 3 removable shelves.

  **Short-door Lockers feature a 33" high storage area with 2 removable shelves.

  **Locker doors are reversible for flexibility and feature locked recessed tee-handles for security.

  **Cabinet Lockers taper from 14" to 12" from front to back in depth at top and bottom to maximize aisle space.




TA20  Tank Cabinet


**Provide vented storage for Propane, Mapp gas or CO2 tanks.

**Full door gasket with two snap latches for positive door closure.

**Interior cabinet cradle and retaining straps secure tanks and prevent movement.

**Floor vent and tubing are included for exhausting fumes.

**Propane cabinets store 20, 30, or 40 lb. tanks.

**Mapp Gas cabinets store 6 1/2" diameter tanks.

**C02 Tank cabinets store 20 lb. cylinders.

Conversion Components, Inc.